Split keel reduces the draft of your boat

Jan 5, 2021

Can also be used to increase stability.

With the massive increase in boat sales through the pandemic, people are getting back on the water. What do you do if you find the perfect boat, but it draws 12”-18” too much? Or is the boat a little too tender?

MarKeel Technology’s Split Torpedo Bulb is a solution for both these problems. You can reduce the boat’s draft by cutting the existing keel and installing a set of custom poured Split Torpedo Bulbs, from 200 lb to 1,200 lb per side. These are made to reduce the draft and maintain the stability of your boat, and the process works best on exterior-mounted keels.

These bulbs can also be used to increase the stability of a tender boat. They are installed on the tip of the existing keel. The added weight will increase the ultimate stability of the boat.

There is a limit to how stiff you can make a boat. The stiffer the boat, the more load you put, from the keel bolts to the hull to the chainplates…etc. The appropriate level of stability needs to be defined for each project. Some keel shapes and designs, however, don’t lend themselves to the installation of Stability Bulbs. The bulbs are best suited to a straight tip cord or bottom of the keel, and an exterior mounted lead or cast-iron keel.

Before you go too far down the road on getting a set of our bulbs for draft reduction or stability increase, we suggest having the condition of the keel bolts checked to ensure that they will hold the added weight. This is important to older boats, especially boats showing any signs of water in the bilge or weeping out of the hull keel joint.

Bulb Installation

The installation of the bulbs for a draft reduction can be carried out by your local full-service yard. I wouldn’t suggest taking this on as a boat owner. Depending on the size of the boat and the weight of the bulbs being installed, there is likely the need for the boat to be held in a travel lift and a tow motor to be used to move the bulbs into place.

From start to finish, you are looking at about 30 to 40 hours. The duration will depend on the size of the boat, the weight of the bulbs, and how busy the yard is. It is a great winter project. The keel stays on the boat, the bulb halves are horizontally bolted through the reduced keel, it is faired and painted, and you are back in the water.

This is an example of a complete draft reduction done in-house. The keel was brought in, cut, the required bulb halves were cast, formed, drilled, and installed. Then the keel was faired and painted, and made ready to ship back to the customer.

The basic process is:

1)  MarsKeel is offered the needed dimensions of the keel, as illustrated on our website. This is basically how much draft a client wants to remove and the general shape of the part to be removed.

2) Once we get those, some drawings and calculations are done to convert the desired draft reduction into a casting weight and a price, but it doesn’t take long.

3) If the price is accepted, we begin the production process.

4) Once cast, they are formed to the customer supplied foil template of the cut line. The yard should make this; they can scribe the shape of the keel foil onto paper and send it to us before the keel is cut. With that, we make a wooden forming template that guides our forming of the bulbs. Then the bulbs have the needed through holes and counterbores drilled into them. They are packaged with the required threaded rods and fasteners and shipped to the client.

The pricing process for the stability bulbs is the same as a draft reduction.

The manufacturing process for the stability bulbs is the same as well. The installation process is the same as the DR process BUT without the cutting of the keel.

Based in Burlington ON, MarsKeel Technology is North America’s largest keel manufacturer, supplying keels to the top production yacht builders and offering repair and modification services for over 40 years.

Related Articles

  • 8 Bells:  Pat Healy

    8 Bells:  Pat Healy

    Pat Healy head coach for the Canadian yachting team at the 1988 Olympic games in Seoul. May 21, 2025 Sail Canada shares with the Canadian sailing community the passing of International Sailing Official, Coach, Mentor and Sailor Pat Healy on May 17. Pat Healy had been an International Judge since 1990 and an International Umpire…. Read More…

  • One-Design K: Peter Van Rossem’s Team Wins Bronze at 2025 Shark Worlds

    One-Design K: Peter Van Rossem’s Team Wins Bronze at 2025 Shark Worlds

    276 Van Rosesem, Wilby, Fair  Photos: Helmut Andl May 22, 2025 By Sail Canada Peter Van Rossem and his crew members Josh Wilby and Matt Fair (Kingston Yacht Club) who won the bronze medal at the 2025 Shark World Championships held May 10-16 May in Altmünster, Austria. A strong showing of 11 Canadian teams took… Read More…